User`s guide

appears on the screen, press
the
2 key. -3
f. When the configuration table
(see Figure
3-1) appears on
the screen, configure the
format as described
' in
Paragraphs
3.4.1 and 3.4.2.
below.
g. After the new format is
configured, press the ESC key.
h. When the following prompt
comes on the screen:
DO YOU WANT TO SAVE THIS
FORMAT?
enter
Y for yes, or N for no,
and press RETURN.
i. If you indicated that you did
not want to save the format,
skip to Step
k. below.
When the prompt:
WHAT NAME DO YOU WANT
TO
USE?