User`s guide

CHAPTER 2
INDEPENDENT ACCESSING
2.1 GENERAL
The paragraphs that follow in this
chapter describe the programming panel
and presents examples of Independent
Accessing.
2.2 PROGRAMMING PANEL
The Programming Panel consists of three
areas: the Control Command Area, the
Bank A and Bank
B Status Display Area,
-
and the Cue Area. For an illustration of
the panel see Figure
2-1.
To get the programming panel up on the
screen, displaying the standard format,
follow the procedure outlined below.
a. Place the PROCALL-X disk into
Drive A.
b. Place a storage disk in Drive
B.
c. Turn AVL Genesis on.
d. When the following prompt
appears on the screen: