User`s guide

8. Reconnect cable from Output of
,--.. Track 3 on Recorder to Play In jack
of GENESIS.
9. With script in front of you, start
the Recorder in Playback Mode
and press
F10 at each synchronizing
point in the script.
10. Stop the tape and rewind it to the
beginning. The Program should be
at Cue
1 and all TX Cues are now
Time Cues.
11. Start the Recorder in Play Mode:
The show will run by Clock-Trak.
12. If some Time Cues are incorrect,
'-7 place the Cursor at that Time Cue
and adjust the time
by typing in a
new time. Add time to make the Cue
happen later, subtract time to make
it happen earlier.
13. When all Cues are correctly
synchronized, connect a second
cable from Out
1 on GENESIS to the
Input on Track
4 of the Recorder.
14. Start the Recorder in Play Mode on
Track
3 and Record Mode on Track 4.
The Synchronized Program will be
recorded on Track 4.