User`s guide

CLOCK TRAK - To Synchronize a show
using Clock Trak. Optional.
1. Using ADD-A-CUE, insert TX into
your Program at each Synchronizing
point in the script.
2. Connect cable from OUT 1 on GENESIS
to Input of Track
3 on Recorder.
3. Put GENESIS in Clock Output Mode
(COM)
.
CTRL/C COM <RET>
GENESIS puts out Clock-Trak signal.
4. At least 5 seconds before sound
starts, record Clock-Trak on Track
3 by starting recorder in Record
Mode and pressing Return.
Record the Clock-Trak beyond the
end of the sound.
5. Rewind the tape to the beginning of
Clock-Trak.
6. Press ESC on GENESIS.
7. Enter CEM <Ret> Clock Edit Mode.