User`s guide

TO RETURN TO THE START of the Program -
CTRL/G <Ret> All projectors
are issued
a HOME
T7
Command
CTRL/G 0 cRet> and the Program
returns to Cue
1.
TO REPEAT A SINGLE CUE, program the Cue
then
-
CTRL/R Each time you press these
keys the previous Cue
is repeated.
TO MOVE THROUGH THE PROGRAM
- LAMPS OFF-
CTRL/S The projectors function
but the lamps are off.
Allows
going thru the
Program without the lamps
flashing. The same
Command returns them to
normal operation. While
in the standby mode,
SBY
is displayed in the
Control
Command Field.