User`s guide

CHAPTER 7
PROGRAMMING PERIPHERAL EQUIPMENT
7.1 GENERAL
PROCALL-X allows you to use two
X15s in
line with your dissolve units (one each
on OUT 1 (BANK A) and OUT 2 (BANK B)).
It also allows you to use both the X-15
and dissolve auxiliaries with their
respective commands. There are, however,
the following limitations:
a. All auxiliary cues must
specify projector
Independents.
b. You can not have an auxiliary
command for the
X-15 and an
auxiliary in your dissolve
unit in the same cue.
7.2 X-15 PROGRAMMMING COMMANDS
XS (SHORT PULSE)
This will initiate
a momentary (50
millisecond) closure of the contacts.
This amount of contact closure time is
usually sufficient for most auxiliary
equipment.