User`s guide

also has a new feature different from
other loops. The command (LPnn) is used
to tell the DOVES how many times the
loop is to be executed. This command
works like a
RPxx command only external
to the GENESIS. This program also
demonstrates how loops can be started
with any number or combination of
projectors and how they can be stopped
in any order; one projector at a time or
all together. TAB
3 shows a dissolve up
and down using LOOPS, BA, and FA.
NOTE:
A Loop will stop at the
status of the projectors at the
time of
a loop GO command.
/7
Finally, I have included below another
sample program for this format that may
be done for fun, but also should be done
as an additional example of command
implementation.
PROGRAM: EYEBALL OPERATOR:
CUE# CODE STATEMENT SCREENS RUN
1 SA SOFT
ALT A
2 W.6 WAIT 0.6 SEC
RUN
3 LL LOOP
LOAD ABCDEFGHI
4 SA SOFT ALT A D
n
5 W.6 WAIT0.6SEC