User manual

5
1.4 Connections to the Pacific C-HSS
Figure 1-1 Pacific C-HSS Components
LCD Panel
LCD Panel
To display the configuration and control parameters
Control
Buttons
Go to previous selection
Go to next selection
Enter next level or select the item
Left Side Panel
AUDIO IN
Connects to an analog audio input
DVI-D LOOP
OUT
DVI connector for DVI video out loop (output signal coming from DVI-I IN
port only)*
Note: Often used for preview when the connected desktop computer is
only capable of supporting a single display output
DVI-I IN
DVI connector for DVI/VGA/YPbPr input sources (a DVI to VGA adapter
or DVI to YPbPr adapter may be required)
SDI/CVBS IN
BNC connector for SDI (3G/HD/SD) CVBS (NTSC/PAL) video sources
HDMI IN
HDMI connector for HDMI input source**
* DVI-D loop out does not support analog source signals; VGA or YPbPr (through VGA or YPbPr to DVI
adapter).
** To comply with the HDCP license agreement, any source with HDCP encryption cannot be converted to
SDI.
Right Side Panel
Power
(DC 12V)
Connects to the 12 V DC/2.5A power adapter
System Fan
Contains the system fan*
SDI OUT
BNC connector supports SDI (3G/HD/SD) signal output
REF IN
Multi-format sync reference input (YPbPr/NTSC/PAL) for genlock function
(frame synchronizer)
Ethernet (IP)
Allows a computer to control the Pacific C-HSS through a network
connection via an Ethernet cable.
(use with Avitech’s ScreenCrop utility)
Table 1-3 Pacific C-HSS Component Description
* Do not cover or block the ventilation openings.