User manual

20
Appendix
The following 2 methods allow for the Pacific C-HSS/C-SHS to be in the same network mask with the
connected computer.
Method 1: Change the IP Address of the Pacific C-HSS/C-SHS
Step 1. Run ScreenCrop utility by double-clicking ScreenCrop.exe. Select the Pacific C-HSS/C-SHS
IP address that appears in the IP LIST window. Then click Change IP.
The following screen will show the current IP address in the New IP field. Corresponding
Network Mask and Gateway will also be displayed.
Figure A-1 ScreenCrop Utility: Change IP Screen
Step 2. Enter the New IP address. Edit the Network Mask and Gateway as necessary. The IP address
will be changed for the target device (saved to flash memory of Pacific C-HSS/C-SHS) after you
click Save.
Step 3. When the next window appears, click OK to exit.
Figure A-2 Save IP Screen