User manual

15
Status Information (1)
IP LIST
Displays all detected Avitech’s Pacific converters in the same network
mask. The status button becomes active (not grayed-out) when
Pacific C-HSS/C-SHS is selected from the IP LIST window.
IP List Refresh
Button
Click the IP list refresh button to update the connected Avitech
devices’ IP address in the same network mask.
via
Upon clicking an IP address in the IP LIST window, the selected IP
address is displayed here. A device can also be selected by typing its IP
address here.
C-HSS / C-SHS
Displays what type of Pacific converter is currently connected.
Output Resolution
Configures the specific output resolution and related frame rate.
Status Button
Shows the operational status of the selected Pacific C-HSS/C-SHS.
This button is only available (not grayed-out) when the Pacific C-HSS/
C-SHS is selected in the “IP LIST” window (refer to section 2.2.3 for
details).
Cropping Feature (2)
Instance
Chooses between 2 different area of interest instances (Instance One or
Two) and then sets the cropping parameters.
Switch Instance
If both Instance One and Instance Two cropping parameters have been
set, then clicking the Switch Instance button will toggle between the two
instances and automatically output the cropping parameters.
Ratio
Sets a fixed (1:1, 3:2, 4:3, 5:4, 16:9) aspect ratio or a non-fixed (Any)
aspect ratio for any area of interest.
Crop
Crops an area by dragging the cursor. Upon releasing the left mouse
button, 4 green cropping corners will display the area just selected (area
of interest).
Crosshair
Automatically selects a window/object to be cropped by positioning
the Crosshair on the desired window/object.
 For example, auto-selects a YouTube window or a Google Map.
Left/Top/Width/
Height
Displays and adjusts the cropped instance’s size and related location.
Set
After entering/adjusting the Left/Top/Width/Height parameters, click this
button to change the location of the four green cropping corners.
Repeated Pan
Enables the pan feature for cropped instance (pan anywhere).
Send to C-HSS
Sends the cropped instance to the selected Pacific C-HSS.
Disable Crop
Disables the cropping.
Cropping feature is only available on the Pacific C-HSS.
Others (3)
Change IP
Changes the IP address of selected Pacific C-HSS/C-SHS.
Save to Flash
Saves the current ScreenCrop session’s parameter to the flash memory
of the Pacific C-HSS. The settings can be automatically loaded on the
next ScreenCrop session.
Disconnect
Terminates the connection of selected Pacific C-HSS/C-SHS.
Table 2-14 ScreenCrop Utility Control Panel Description
The Pacific C-SHS, the sister device of the Pacific C HSS, has different features and limited options for the
ScreenCrop utility. It only supports: Status, Change Output Resolution and Change IP.