User manual

13
Color Bar
Status
On: enables the color bar and pattern select feature.
 COLOR BAR
 2×2 CROSSHATCH
Off: disables the color bar feature.
Exit
Exits the color bar setup menu.
Table 2-11 Color Bar
1. The color bar and the 2x2 Crosshatch can only be turned on/off when there is no input signal.
2. The default setting is for the color bar to be activated whenever there is no input signal.
3. The color bar feature is a pattern generator that shows a signal when there is no source. It can be
used as a self-test pattern for input signal or for verifying other devices.
Audio
Status
On: enables the audio output.
 SOURCE: selects the audio source.
 HDMI
 LINE IN
 SDI
 DELAY: sets the delay times.
 0 to 170ms, sample rate at 48kHz.
 BYPASS
Off: disables the audio output.
Exit
Exits the audio setup menu.
Table 2-12 Audio
Setup
Backlight
On: enables the LCD panel's backlight.
Off: disables the LCD panel's backlight.
Contrast
Sets the LCD panel's contrast from 1 to 16.
Idle Time
On: scrolling text (conversion format and related frame rate) will appear
when the LCD panel of Pacific C-HSS is idle.
 15 mins
 30 mins
 45 mins
 60 mins
Off: disables the scrolling text feature.
Reset
On: resets to default setting, system reboot is required.
Off: present setting.
BIOS Version
Shows the current firmware version for reference.
IP Address
Allows user to modify the IP ADDRESS, SUBNET MASK, and
GATEWAY based on Ethernet environment.
Exit
Exits the setup menu.
Table 2-13 Setup