User manual

12
Genlock
Status
On: synchronizes the video sources DVI-I IN, SDI/CVBS IN, and the
HDMI IN port’s signal with the REF IN port signal.
 GENLOCK OUTPUT: refer to table 2-10 for more details on
supported output standard.
 TIMING OFFSET: sets the delay lines.
 for SD 525 signal up to 524 delay lines
 for SD 625 signal up to 624 delay lines
 for 720p signal up to 749 delay lines
 for 1080p or 1080i signal up to 1124 delay lines
Off: disables the genlock feature.
Exit
Exits the genlock setup menu.
Table 2-9 Genlock
The genlock feature requires a sync reference signal to enter the REF IN port. Changing or
disconnecting the sync reference will cause the Pacific to automatically turn off genlock.
Table 2-10 Genlock Output