User manual

13
Crop Image
Status
On: adjusts the crop area and location.
 LEFT: sets the horizontal starting point.
 TOP: sets the vertical starting point.
 RIGHT: sets the horizontal end point.
 BOTTOM: sets the vertical end point.
 DEFAULT
Off: disables the crop image feature.
Exit
Exits the crop image setup menu.
Table 2-5 Crop Image
1. When the CROP IMAGE feature is ON, the AFD DETECT (see table 2.7) function will be automatically
disabled.
2. Make sure the difference in value between LEFT and RIGHT is at least 20%
(e.g., LEFT = 80.0% RIGHT = 100.0%). Likewise, the difference in value between TOP and BOTTOM
must also be at least 20% (e.g., TOP = 80.0% BOTTOM = 100.0%). Simply put, the smallest crop size
that is valid is 20% of the total height by 20% of the total width.
Aspect Ratio
Status
On: sets the display’s aspect ratio.
 4:3
 16:9
 AUTO
 CUSTOM
Off: disables the aspect ratio detect feature.
Exit
Exits the aspect ratio setup menu.
Table 2-6 Aspect Ratio
1. When the “AFD DETECT” feature (detailed in the next item) is set “ON” and AFD is present in the
input signal, the “ASPECT RATIO” function will be automatically disabled.
2. When the “AFD DETECT” feature (detailed in the next item) is set “ON” but AFD is not present in
the input signal, the “ASPECT RATIO” function will not be affected.
3. When the width ratio is greater than the height ratio, the width ratio must be less than 6 times the
value of height ratio.
4. When the height ratio is greater than the width ratio, the height ratio must be less than 6 times the
value of width ratio.