User manual
9
OSD
(on screen display)
Video Alarm
On: sets the alarm time from 0 seconds up to 23 seconds.
Off: disables the video alarm.
Audio Alarm
On: enables the audio alarm.
Off: disables the audio alarm.
Signal Type
On: enables the OSD of the signal type.
BKGD (background): sets the background color RED/GREEN/
BLUE/YELLOW/MAGENTA/CYAN/BLACK/WHITE/CUSTOM.
FONT: sets the font color WHITE/BLACK/CYAN/MAGENTA/
YELLOW/BLUE/GREEN/RED/CUSTOM.
Off: disables the display of signal type.
Custom Label
On: enables the customized label.
DEFAULT: selects the factory default label.
CUSTOM: creates a custom label (refer to Figure 2.5).
TEXT: input the text for SOURCE1 by scrolling through the
available symbols – (up to 30 ASCII characters)*.
FONT SIZE: select between sizes: 16/24/36/48 (ARIAL FONT)
TRANSPARENCY: select between 6.25% to 100.0%
BKGD (background): select between CUSTOM/RED/GREEN/
BLUE/YELLOW/MAGENTA/CYAN/BLACK/WHITE.
FONT: select between CUSTOM/RED/GREEN/BLUE/
YELLOW/MAGENTA/CYAN/ BLACK/WHITE.
OUTSIDE: ON/OFF
FILL BKGD: ON/OFF
Off: disables the custom label feature.
Safe Area
On: enables safe area graticule. ** (refer to Figure 2.6).
UPPER: sets the upper boundary.
LOWER: sets the lower boundary.
LEFT: sets the left boundary.
RIGHT: sets the right boundary.
DEFAULT: selects the factory default values.
Off: disable safe area.
Display 4:3
On: enables the OSD of 4:3 aspect ratio outline.
Off: disables the display of 4:3 aspect ratio.
Audio Meter
On: enables the OSD of audio meters. (refer to Figure 2.4)
SWITCH: turn on/off any of the following meters
METER1_L
PHASE1
METER1_R
R/METER3_L
PHASE3
METER3_R
METER2_L
PHASE2
METER2_R
METER4_L
PHASE4
METER4_R
GROUP: METER’s: 1 & 2 and METER’s: 3 & 4 can be assigned to
any of the 4 groups. However, (1 & 2) and (3 & 4) cannot share the
same GROUP. (refer to Figure 2.4)
ALARM: –5 to 3
ALIGNMENT: –51 to –3
HEAD ROOM: –21 to 3
BALLISTIC: selects the type of audio meter
VU (Volume Unit Meter)
DBFS (Decibels Relative to Full Scale)
PPM (Peak Program Meter)
OUTSIDE: turns on/off
WIDTH: 5 to 20
TRANSPARENCY: 6.25 to 100 %
DEFAULT: selects the factory default values.
Off: disables the OSD of audio meters.