User manual

5
1.4 Connections to the Pacific C-SHS
Figure 1-1 Pacific C-SHS Components
LCD Panel
LCD Panel
For displaying the configuration and control parameters
Control
buttons
Go to previous selection
Go to next selection
Enter the next menu level or select item
Left Side Panel
Headset
1/8 inch audio port for connecting headphones (stereo)
SDI IN
BNC connector for SDI (3G/HD/SD) & CVBS (NTSC/PAL) video sources
LOOP OUT
BNC connector for SDI (3G/HD/SD) video out loop
Note: CVBS (NTSC/PAL) is not supported via loop out
System Fan
Contains the system fan*
Right Side Panel
Power
(DC 12V)
Connects to the 12VDC/2.5A power adapter
HDMI OUT
Connects to the monitor display’s HDMI signal cable**
DVI OUT
Connects to the monitor display’s DVI signal cable
Ethernet (IP)
For monitoring/controlling the Pacific through a network connection
Table 1-3 Pacific C-SHS Component Description
* Do not cover or block the ventilation openings.
** Embedded audio is not available with the following input formats.
1. YCbCr 4:4:4 – 1080p(24/23.98)PsF and 720p(30/29.97)Hz
2. RGB 4:4:4 – 1080p(24/23.98)PsF and 720p(30/29.97)Hz