User Guide

@V5000 User’s Manual Setting up Your Machine
2-9
Setting up Your Network Parameters
Before using the @V5000, please setup the @V5000 properly on your
network to perform email and fax forwarding functions. The following
network parameters have to be set. For required information and LAN
connection, please contact your network administrator.
To set up the network parameters via the control panel,
1. After turning on the @V5000, press the Menu button and select the
“Network Configuration”. A Login screen appears. Press the
Select/OK button to skip to prompt the Network Configuration screen
(see below) in the LCD-display. (If you have changed the login name
and password, the new login name and password are required each
time you select the “Network Configuration” or “Administrator”.)
1. General
2. Network Configuration
3. Copy
4. E-Mail
5. Fax
6. Speed Dial
7. Function Buttons
8. Administrator
9. Information
1. IP Address: . . .
2. Subnet Mask: . . .
3. Gateway IP: . . .
4. SMTP Server: . . .
5. SMTP Port:
6. NTP Server: . . .
7. Fax Server: . . .
8. Save & Exit: . . .
9. Exit
The Menu items The Network Setting
2. Consult your network administrator for the network parameters and
enter them respectively.
3. Use the q key to scroll the Save & Exit menu and press the Select/OK
button to save your setting.