User`s manual

Using the Shortcut Button

To use a shortcut button,

1. Select and tap the green [Start] button of a shortcut button to use from the

shortcut button list on the main screen of the touch panel.

Note: If you want to change settings of your shortcut button before tapping

the green [Start] button, simply tap the [Change] button on the shortcut

button to update your settings, and then tap OK.

2. The product starts scanning and the preview image will be displayed.

3. On the Preview screen,

z If the scanned image is OK, press the [Start] button ( ) on the touch

panel or the [Scan] button (

) on the control panel to distribute the

scanned image. You may also insert more pages by taping the [Insert

Pages (

)] button on the bottom of the screen.

z If the scanned image is not OK, tap the [Cancel] button to abort the job.

4. The scanned images are sent to your specified destination.

Green Start Button

of Shortcut Button