User`s manual

2-2

2.3 Install the Batteries

1. Push and remove the battery cover on the scanner.

2. Insert 2x AA alkaline batteries into the battery compartment. Make sure the batteries

are inserted with the correct polarity. (note correct + - direction)

3. Insert the battery cover.

Note:

The scanner can only run on 2x AA alkaline batteries or 2 NiMH rechargeable batteries.

2.4 Install micro SD Card

You must install a micro SD

card to the SD slot of the scanner to store your images.

Gently press in until the SD card is latched.

micro SD card

Note:

z The scanner only accepts micro SD card in FAT16 or FAT32 format. NTFS and other file

formats are not supported.

Always insert a micro SD card before calibrating and scanning.