User manual

6-1
6. Maintenance
6.1 Cleaning the ADF
From time to time the pad assembly and feeding rollers may
become contaminated with ink, toner particles or paper dust.
In this case the scanner may not feed documents smoothly.
If this occurs please follow the cleaning procedures to return
your machine to its original state.
The Cleaning Procedures
1) Soak a clean lintless cloth with some isopropyl alcohol
(95%).
2) Press the ADF Release button on the upper. Open the front
cover slightly to the left. Wipe the upper feeding roller
with the cloth from side to side. Rotate the roller forward
with your finger and repeat the cleaning steps above until
the entire roller is cleaned.
3) Wipe the ADF pad and roller.
4) Close the scanner front cover. Your scanner is now ready
to use.
ADF Release
Button