User manual

4. Connecting to a Computer
By connecting the scanner to a computer, you can access the scanned images
on the memory card directly, or use the scanner as a memory card reader, so
that you can freely copy, paste or delete files to and from the memory card
using the computer.
4.1 How to connect to a computer
1. Connect the plug on the power adapter cable to the power connector on
the scanner.
2. Plug the power adapter into a power outlet. Wait until the indicator light
on the scanner stops blinking and stays on steady, indicating the scanner
is ready.
3. Insert a memory card into the memory card slot or a flash disk into the
flash disk slot.
Insert a flash disk into the flash disk slot.
Insert a memory card into the memory card slot.
4-1