User`s manual

User’s Manual
7.4 Replacing the ADF Friction Roller
After scanning approximately 100,000 pages through the ADF,
the ADF Friction Roller may be worn out and you may
experience problems with document feeding. In this case, you
may need to replace a new ADF roller. For ordering the ADF
roller, please consult your nearest dealer and follow the
procedure below to replace it.
Disassembling Procedure
1. Press the ADF Release button.
2. Gently open the ADF Front Door to the left.
3. Hold the Friction Roller Cover with your fingers as shown
and place it down.
4. Press the right end of the Friction Roller externally to
detach it from the slot and then detach the left end from
its hole.
7-5