User Guide

-3-10
3.4.4 CHANGING YOUR COPY DENSITY
Copy density refers to the degree of darkness which the
DS610CF has reproduced. There are times when your original
is unsatisfactorily darker or lighter. It is of great advantage
to use the density feature to compensate the unsatisfactory
original.
The Operating Steps:
1. Place your original face down on the document glass.
2. Press the “Lighter/Darker” button. The Message Window
displays the default degree of darkness.
3. Repress the “Lighter/Darker” button to select one of the other
levels. Or you may press the “s” to increase the level, press
the “t” button to decrease the level.
4. Press the Copy button. Your printout shows the darkness or
brightness has been compensated.