User`s manual

78
Advanced Operation
Using Special Settings
1. Place your document(s) with text FACE UP in the ADF or FACE DOWN on
the glass.
2. Press the Copy button on the control panel to prompt the Copy main screen.
3. If you need to make more than one copy, enter your desired copy count with
the numeric keypad on the control panel. The number of copy will appear on
the upper right corner.
4. If you need to set a default printer, touch and select a printer in the printer
list and then touch the Set as Default button to set the default printer. The
selected default printer will be checked.
5. If you need to print the test page of a printer, touch and select a printer in
the printer list and then touch the Print Test Page button to print the test
page.
6. If you need to delete a printer in the printer list, touch and select a printer in
the printer list and then touch the Delete Printer button. A warning dialog
box will confirm whether to delete the selected printer. Click OK to delete the
selected printer or Cancel to return to the Select Printer screen.
7. On the Basic screen, check if the paper size, the present scaling percentage,
or the paper tray meets your requirement. If not, make any change that
suits your needs.
8. Touch the Advanced Copy tab to prompt more settings. (For more
information about the settings, see the settings description below.)
9. Press the B&W or Color button on the control panel to copy your document(s)
in black and white.