User`s manual

26
Mail information on Network Settings: Used to specify the product’s mail server
information.
Item Description
Mail Server Enter the SMTP IP.
SMTP Port# Enter the SMTP Port number.
Device E-mail Address
E-mail Address Enter the email address of the device. This is also
the default “From” address when you are sending
email from the device.
After sending the email with the mail server not
specified, the product will automatically detect a
mail server with its authentication method, and
queries a user to determine the acceptance of the
detected mail server.
Authentication
Method
Enter the email authentication method.
Choice: *None, SMTP, POP3
Login Name Enter the login name for SMTP or POP3
authentication.
Password Enter the password for SMTP or POP3
authentication.
External Address Book
LDAP Server IP
or URL
Enter your LDAP server IP or URL address here.
SSL Enable Enable or disable SSL.
Choice: *ON, OFF
Login Name Enter the login name of the LDAP server.
Note:
1. In Microsoft Active Directory, some servers
may require you to add “domain name” as
your full login name. For example, if your
domain name is “company” and your user
name is “administrator”, then your full login
name is “company\administrator”.
2. When your LDAP server requests an
“anonymous login”, please leave your login
name and password blank instead of typing
“anonymous” as your login name and
password.
Password Enter the password of the LDAP server.
Port# Enter the Port number of the LDAP server.