User`s manual

104
Scanner Operation
1. Place the document FACE DOWN on the document glass or FACE UP in the
ADF.
2. Start your scanning application.
3. Pull down the File menu and choose Select Source.
If the Select Source command is not available on the File menu, see your
application’s user’s guide to determine how the TWAIN link is used. A
dialog box with a list of scanning sources appears.
4. Select the model name of your product. The following dialog box appears.
5. Type the IP address of the machine and then click the “OK” button. The
TWAIN user interface will be prompted.
6. Select the scanning method you want to use on the Scan Method
drop-down menu.
7. Select the mode you want to use for your scans on the Image Type
drop-down menu.
8. Select a scanning resolution on the Resolution drop-down menu.
9. Select the setting for the scanning features (e.g. Sharpen, Descreen, etc.)
that you want to use.
10. Click on the Preview or Scan button to preview or scan you documents.