User`s manual

103
Scanning Your Documents
System Requirements
• IBM compatible PC (Pentium or later);
• Microsoft Windows 2000, Windows XP, Windows Vista
• At least 100M bytes of free hard disk space (500 MB is recommended)
• At least 128M bytes of system memory (512 MB of RAM is recommended)
At least 1 GB of RAM for Windows Vista
• A VGA monitor
• A CD-ROM drive
Driver Installation Procedure
Important:
1. The scanner driver contains both TWAIN driver and WIA driver. After the
installation of scanner driver is completed, this scanner allows you to scan via a
TWAIN user interface or a WIA interface. Start your TWAIN-compatible image
editing software application to select a TWAIN or WIA user interface. Or you
might launch Microsoft’s Scanner and Camera Wizard to scan via WIA user
interface.
Installation procedures are as follows:
1. Connect the power cable and turn on your product.
2. Start Microsoft Windows.
3. Insert the supplied CD-ROM into your CD ROM drive.
4. The CD-ROM will auto launch on most systems. However, if your system does
not support auto launching CD-ROMs, press the Start button, choose RUN, type
d:\driver\setup.exe (d: the CD-ROM drive in use), and then click OK.
5. Follow the on-screen instructions to complete the driver installation.