User`s manual

User’s Manual

2.1 Unlocking your scanner

protect the scanning unit from damage during

transportation, a lock switch is designed at the back of the

scanner to keep the scanning unit from moving. To unlock the

scanner, move the lock switch down as shown in Fig. 2-1.

Figure 2-1 Unlocking the Scanner

Figure 2-2 Home position

Note: If the scanning unit is not located at the front of the

scanner before transporting the scanner, be sure to do the

follows:

1. Turn on the scanner. The scanning unit should move to

the front of the scanner.

2. Press the lock switch down to the “Lock position”.

3. The scanner is now ready to transport.

Scanning unit at

this position

before locking the

scanner

2-2