User manual

7-1
7. Using and Caring the
Optional Auto Document
Feeder
7.1 Installing the Auto Document Feeder
1. Remove the document cover.
2. Insert two hinges of the auto document feeder to the
corresponding holes on the document glass as shown in
below.
3. Pull out the paper chute extension to the length you want.
4. Connect the ADF (Auto Document Feeder) cable (attached
to the document cover) to the ADF port at the back of the
product.
Figure 7-1
7.2 Loading Your Paper
7.2.1 Notice on Using the ADF
 Document(s) can range in size from 4.5” x 5.5” (114 x
139 mm) to 8.5” x 14” (216 x 356 mm).
 Document(s) can range in weight from 13 to 32 lbs
(49~120 g/m
2
).
Paper Chute
Extension
ADF Cable