User Guide

4-2
4. Customize the copy settings by using the control panel buttons.
See “Setting Copy Options” on page 4-3.
To clear settings, use Stop/Clear button.
5. Press Start to begin copying.
Note: If you are using the flatbed to scan, do not put any media on the ADF.
To load originals into the ADF input tray
1. Make sure the flatbed scanner is free of media.
2. Roll the paper and place it in the tray.
3. Put the top end of the original media stack into the ADF input tray, with the media
stack face up and the first page to be copied on top of the stack.
4. Adjust the media guides to the document size.
5. Customize the copy settings by using the control panel buttons.
See “Setting Copy Options” on page 4-3.
To clear settings, use Stop/Clear button.
6. Press Start to begin copying.
Note: If you are using the ADF to scan, do not put any media on the flatbed and open
the ADF lid.