User manual

Overview of Avira Professional Security
Avira Professional Security - User Manual (Status: 14 Dec. 2012) 43
Give the job a name and, where appropriate, a description.
Click Next.
The dialog box Type of job appears.
Select Scan job.
Click Next.
The dialog box Selection of the profile appears.
Select the profile to be scanned.
Click Next.
The dialog box Time of the job appears.
Select a time for the scan:
 Immediately
 Daily
 Weekly
 Interval
 Single
 Login
Where appropriate, specify a date according to the selection.
Where appropriate, select the following additional options (availability depends on job
type):
Repeat job if the time has already expired
Past jobs are performed that could not be performed at the required time, for example
because the computer was switched off.
Click Next.
The dialog box Selection of the display mode appears.
Select the display mode of the job window:
 Invisible: No job window
 Minimized: progress bar only
 Maximized: Entire job window
Select the Shut down computer if job is done option if you want the computer to
shut down automatically when the scan is finished. This option is only available if the
display mode is set to minimized or maximized.
Click Finish.
Your newly created job appears on the start page of the ADMINISTRATION >
Scheduler section with the status enabled (check mark).
Where appropriate, deactivate jobs that are not to be performed.
Use the following icons to further define your jobs: