User manual

Reference: Configuration options
Avira Professional Security - User Manual (Status: 14 Dec. 2012) 135
Filtered content: offset
With a mouse click on the link a dialog box appears in which you can define the filtered
content offset. The offset is computed from where ICMP header ends.
Predefined rules for IP packets
Setting
Rules
Low
-
Medium
-
High
Deny all IP packets
Deny IPv4 packets from address 0.0.0.0 with mask 0.0.0.0.
Don't log when packet matches rule.
Allow/ Deny
By clicking on the link with the mouse, you can decide whether you want to accept or
reject specially defined IP packages.
IPv4/IPv6
By clicking on the link with the mouse, you can choose IPv4 or IPv6.
IP address
By clicking on this link with the mouse, a dialog box opens in which you can enter the
required IPv4 or IPv6 address.
IP mask
By clicking on this link with the mouse, a dialog box opens in which you can enter the
required IPv4 or IPv6 mask.
Event database
By clicking on the link with the mouse you can decide whether to write to the event
database or not if the packet complies with the rule.
Outgoing Rules
Outgoing rules are defined to control outgoing data traffic by the Avira FireWall. You can
define an outgoing rule for one of the following protocols: IP, ICMP, UDP, TCP. See Add
new rule.