User manual

Reference: Configuration options
Avira Professional Security - User Manual (Status: 14 Dec. 2012) 125
Address
Enter the computer name or IP address of the proxy server you want to use to connect
to the web server.
Port
Please enter the port number of the proxy server you want to use to connect to the
web server.
Login name
Enter a user name to log in on the proxy server.
Login password
Enter the relevant password for logging in on the proxy server here. For security
reasons, the actual characters you type in this space are replaced by asterisks (*).
Examples:
Address: proxy.domain.com Port: 8080
Address: 192.168.1.100 Port: 3128
11.5 FireWall
The FireWall section under Internet Protection > Configuration is responsible for
configuration of the Avira FireWall.
11.5.1 Adapter rules
In the Avira FireWall, an adapter represents a software simulated hardware device (e.g.
miniport, bridge connection, etc.) or a real hardware device (e.g. network card).
The Avira FireWall displays the adapter rules of all existing adapters on your computer for
which a driver was installed. (Options available in expert mode only.)
 ICMP protocol
 TCP Port Scan
 UDP Port Scan
 Incoming Rules
 Outgoing Rules
 Buttons to manage the rules
A predefined adapter rule depends on the security level. You can change the Security
level under Internet Protection > FireWall in the Control Center or define your own adapter
rules. If you have defined your own adapter rules, the Security level in the FireWall section
of the Control Center is set to Custom.