User manual

Installation and uninstallation
Avira Server Security - User Manual (Status: 16 Dec. 2013) 16
3.3.3 Command line parameters for the setup program
Use the following parameters for installation and uninstallation:
 /INF=<Script name with path>
The setup program starts with the script mentioned and retrieves all parameters
required.
Installation: PRESETUP.EXE /INF=e:\disks\setup.inf
Uninstallation: PRESETUP.EXE /INF=e:\disks\setup.inf /AVUNINSTALL
 /SILENT
The setup script runs down completely without user interaction.
3.3.4 Parameters of the file setup.inf
In the control file setup.inf, you can set the following parameters in the [DATA] field for the
automatic installation of the Avira product. The sequence of the parameters is unimportant.
If a parameter setting is missing or wrong, the setup routine is aborted and an error
message is displayed.
 InstallPath
Destination path in which the Avira Server Security is installed. It has to be included
to the script. The environment variable cannot be used.
Example: InstallPath="%PROGRAMFILES%\Avira\AntiVir Server\"
 LicenseFile=<Path and file name of the license file>
Avira Server Security is installed with the license. If you enter the file name only, the
license file will be searched in the source folder of the setup only.
Example: LicenseFile="A:\hbedv.key"
 RestartWindows= 0 | 1
If a restart of the system is required after the installation, this can be performed
automatically (standard) or a message box is displayed.
0: Disabled (restart with Message Box)
1: Enabled (automatic restart)
 DeleteFolderOnUninstall=1
Deletes the configuration during uninstallation
 Guard= 0 | 1
Installs the Avira Real-Time Protection (on-access Scanner).
1: Install Avira Real-Time Protection (default)
0: Do not install Avira Real-Time Protection
 RootKit= 0 | 1
Installs the AntiVir rootkit protection module. The module detects malware hidden in
the system.
1: Install AntiVir Rootkits Protection
0: Do not install AntiVir Rootkits Protection (default)