User manual

Installation and uninstallation
Avira Server Security - User Manual (Status: 16 Dec. 2013) 15
installation via a network. An installation file for Internet-based installation
cannot be used.
Avira products can be easily shared on the network with a server login script or via AMC.
For information on installation and uninstallation on the network:
 see Chapter: Command line parameters for the setup program
 see Chapter: Parameter of the file setup.inf
 see Chapter: Installation on the network
 see Chapter: Uninstallation on the network
3.3.1 Installation on the network
The installation can be script-controlled in batch mode.
The setup is suitable for the following installation:
 Initial installation via the network (unattended setup)
Change installation and update
Note
We recommend that you test automatic installation before the installation
routine is implemented on the network.
To install Avira product on the network automatically:
You must have administrator rights (also required in batch mode)
Configure the parameter of the file setup.inf and save the file.
Begin installation with the parameter /inf or integrate the parameter into the login
script of the server.
Example: presetup.exe /inf="c:\temp\setup.inf"
3.3.2 Uninstallation on the network
To uninstall Avira products on the network automatically:
You must have administrator rights (also required in batch mode)
Example: presetup.exe /remsilent
/unsetuplog="c:\logfiles\unsetup.log"
Start the uninstallation with the parameters /inf and /AVUNINSTALL or integrate
the parameters into the login script of the server.