User manual

AntiVir Exchange servers. Additionally, each server can be configured individually; for

details refer to 3.3.1.4 Settings for an Individual AntiVir Server .

1. Select Basic Configuration - General Settings

2. To open the Properties:

a. In the right window, right-click on AntiVir Servers Settings and select

Properties.

b. Or open the Properties with a double-click on AntiVir Servers Settings.

c. Or in the left window section under Basic Configuration, right-click on

AntiVir Server and select Properties.

Packed Files and AntiVir Monitor

The settings on the General tab set the maximum size of unpacked files on the hard disk

and the maximum recursion depth for archives. Whenever an e-mail exceeds one of

these values, it is moved to the BADMAIL area.

Attention: Be sure to use a correct setting for the communication port for AntiVir

Monitor. Otherwise, communication with the servers will be impossible.

Usually, port 8008 is used (also entered as default port during installation). The values

specified here apply to all servers.

Avira AntiVir Exchange 7