IP Video 9100(B) User Guide
IP VIDEO 9100 & 9100B PLUS USER MANUAL User Guide IP Video 9100(B) Manual version: 2.38 Date: NOV, 2006 -1- VER. 2.
Caution: Any changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for FCC and CE. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in commercial environment. Important Notice 1. IP Video 9100(B) is for indoor use only. 2. IP Video 9100(B) is not waterproof.
IP VIDEO 9100 & 9100B PLUS USER MANUAL Table of Contents 1. PRODUCT OVERVIEW............................................................................................... 4 FEATURES ...................................................................................................... 2. PHYSICAL DESCRIPTION ......................................................................................... 5 SPECIFICATION .............................................................................................
1. Product Overview IP Video 9100(B) has an IP digital web server inside. With this great gadget you can put up 4 different sources with only one set of IP, for example (live security observing, online education, TV shows, video games and etc) make remote locations immediately accessible through standard web browsers.
IP VIDEO 9100 & 9100B PLUS USER MANUAL 2. Physical Description BOX CONTENT IP Video 9100 package content： 1 x IP Video 9100(B) 1 x RJ 45 internet line 1 x DC Power adopter (110~240V) 2 x Composite Cable (RCA jacks) 4 x BNC to RCA jacks 1 x CD (a. IP Editor program b.
3. Panel Description Back Panel: from left to right: 1. Power On / Off 2. 4 Video Input 3. Audio input 4. Reset Button Side Panel: 1. DC Power - 5V, 110 ~ 240. 2.
IP VIDEO 9100 & 9100B PLUS USER MANUAL 4. Installation Before using IP Video 9100(B), follow bellow: Before installation: Reconfirm your package content Prepare a Hub for Internet monitor Electricity 110 ~ 240 V Hardware installation 1. Plug in IP Video 9100(B) Power 2. Plug in RJ 45 line to a HUB 3. Connect the HUB to Internet modem (ADSL/XDSL modem) 4. Connect Video source for IP Video box. 5. Turn you computer on -7- VER. 2.
SOFTWARE INSTALLER Please follow the steps below to install the software. 1. Insert the CD in package and windows will auto-run. If not please browser the file Autorun.html in CD. Chose the langrage you can read. 2. Click IP KamVid 1070 in driver of CD and click OPEN top install the driver procedure. 3. Please follow the wizard to install all the program we suggest. 4.
IP VIDEO 9100 & 9100B PLUS USER MANUAL 2. User can change its name (please use numbers or letter) or IP (please set in the same subnet as your PC) in the text windows. Then click Submit after setting finish. After about 20 seconds, the new setting will work. Click Update, the new setting of equipment will display in text window. B.
IP_ KAM VID_ 1070 After connecting the power and RJ 45 line, following the steps below to install the software. Step 1: Install IP KAM by executes Setup.exe in the CD; choose setup language and the install shield Wizard will help finish the program. Step 2: Then you can see shortcut icon “IP KamVid 1070 “on desktop, click this icon. Note: Be sure that the power is turn on and the RJ45 line is properly connected.
IP VIDEO 9100 & 9100B PLUS USER MANUAL NOTE: 1. After you have installed IP 9100(B) on your PC, the IP 9100(B) was registered in DirectX. IP9000A can be used as local camera by any software that supported DirectX, such as MSN, Amcap, Media encoder, Yahoo Messenger as long as you not change the directory path of ipcam’s driver. 2.
Work with Yahoo /MSN Messenger 1. Work with Yahoo /MSN Messenger: We use Yahoo for instance. Select the friend you would like to send your video. For instance, we pick up YahooHelper.
IP VIDEO 9100 & 9100B PLUS USER MANUAL 2. Choose Webcam then system will ask your Internet connecting speed. 4. You can type in appointed IP address (No matter Real IP or Dynamic IP) and confirm by click “Add” and choose if reverse the out streaming video. We support A. Normal B. Flip Vertical C. Flip Horizontal D. Rotate 180 - 13 - VER. 2.
If the video is upside down, you can choose D to get rotate video. And also adjust the video color ; Brightness, contrast, Hue, Saturation, Sharpness Note 1 : for safety issue , as transfer video by Yahoo /MSN, only Administrator can do the video streaming. You have to type the username and password. 2 : Work with Yahoo/ MSN , the streaming speed is depend on Yahoo .MSN server. 2. INFINITELY CAM : Please refer in readme file. 5.
IP VIDEO 9100 & 9100B PLUS USER MANUAL 1-1 : Using Still IP: list your still IP address 1-2 : Choose “Reboot immediately”. Please close your browser and reboot again and type in your IP address once again. If using DHCP, please choose‘ Automatically by DHCP” *And please use IP EDITOR program (Find users exact IP) that’s included in the CD ROM 2. DHCP setup- ADSL / xDSL: ISP will provide your exact IP address, please enter your Username and password for your provider.
2-1 Enter your user name, password, mail server, mail name (pass word), sender e-mail, and receiver e-mail. 2-2 Choose Save & Dial Now, by using PPPoE it can automatically dial to your ISP, and ISP will provide exact IP address in your mail.
IP VIDEO 9100 & 9100B PLUS USER MANUAL 6. Functions Please refer to all the function on the left side of IP Video 9100(B) AP; most of its configuration can only be use by Administrator. Functions: 1. IP address 2. Change Password 3. Camera Control: Picture Quality - Low, High, Medium, Clarity& Motion (Resolution) - 640*480,352*288,320*240,176*144 Frequency – Indoor 50, Indoor 60 & Outdoor 7. Configuration: System, User, Motion detection, Network, Channel, and DDNS 8.
5. Operation Mode: Continues mode: Video will display continues Period – Video will refresh per millisecond or per second. . 6. View Log – view which IP has been visiting your Live image Note: View/Log / Camera Window As in View Log, the video will not show on windows, to get the video back Please click Camera Window. 7. There are Video setting in Configuration: * System * User * Motion Detection * Network * Audio * DDNS Video Window: Click to go back to Application main page.
IP VIDEO 9100 & 9100B PLUS USER MANUAL 7-1 System Setting: Setup Name , Time , show on Windows, The Interval (MS ) means the interval range for IP Video to send picture at mini second. 7-1-1 : Camera name, time and date setup Note: maximum 18 English characyters 7-1-2 : Http Port setup : For customer with IP Sharer device can setup the share port Please check the setup in the IP Share device and type the port number in this area. - 19 - VER. 2.
7-1-3 : Reset to factory configuration 7-1-4 : Restart IP Video 9100(B) 7-1-5 : Renew its firmware : Please note the updat eprocedure can not be interrupt or the sdeviece wourl be not be work probably. 7-2. User Management: Can choose user authorization require optional Choose if viewers need a password or not. *Yes - Viewers needs a password *No - Open to all viewer who logs in to users IP 7-2-2: Add user by adding a username and a password and you can add a current users list.
IP VIDEO 9100 & 9100B PLUS USER MANUAL 7-3-1: Choose motion detection: *Disable – no detection. *Enable: choose – Low / Mid / High 7-3-1-1: Motion Detection Setup: Fill sender mail and receiver mail. 7-3-1-2: When send to FTP, please fill in its FTP server address, user name, password, account and upload path, and click on Upload images when motion detected. Please refer the right illustration: You can safe file in appointed file like file “abcd” - 21 - VER. 2.
7-3-1-3 :Note setting : Future support. 7-4 Network setting : Please refer in page 14. 7-5 . Audio : Only Administrator can enable and disable the audio . If audio is on, both administrator and guest user can hear the audio, if the audio is off, both administrator and guest can not hear the audio. 7-6 DDNS : Please refer in Page 25. 7-7 Click Video Window - Go back to the Camera Window, User can try to choose the Splits and the Operation Mood.
IP VIDEO 9100 & 9100B PLUS USER MANUAL 9. Video Window: after click, the left screen will back to Monitor video. 10. When right click mouse, it can also use: - View Splits Rotate Resolution Image Recording Save picture 10-1 View - Resizable: adjust screen size. - Actual size: default to original size. - Status Bar: show ip address, and screen size. 10-2 Split - 1x1, 2x2, 3x3, 4x4 - Split to 1,4,9,16 continuous screen 10-3 Rotate - Rotate 0 - Rotate 180 - Flip Horizontal - Flip Vertical - 23 - VER.
Rotate 0 Rotate 180 10-4 Quality: Low High Medium Clarity Motion 10-5 Resolution - 640*480, 352*288 , 320*240, 176*144, 160*120 10-6 Image Recording - Record image to JPEG and AVI file. Both format can be recorded in the same time. JPEG: can select how many pictures taken in each file. And time frame.
IP VIDEO 9100 & 9100B PLUS USER MANUAL 10-6-1 Recording AVI - Select save as AVI, and then select the maximum number of frame in each file. Note: If select No limit, it will continue recording until it used up all memory space. 10-7 Save current picture as - Take a snap shot on current images showed on IP Video 9100 AP. 11. Dynamic DNS (DDNS) When the IP9100B dial up to the internet network, your IP provided by your ISP is random.
12. Firmware update User can update the firmware. First, click Firmware update and it will pop up Firmware Update window. Then, click Browser to select the new firmware. At last, click Upload to update the firmware.
IP VIDEO 9100 & 9100B PLUS USER MANUAL 7. Other Functions 1. IP Video 9100 can view 9 different IP at the same time. .基1-1 Adding IP Address A. Add in another IP address Please add in a different IP in “ Watching and press enter” Note1: please type in http:// before your IP. B. Press AD” Note2: when selecting different views, it will show different IP addresses in Watching. C.
８. Authorization In IP Video 9100(B) factory set up: factory setting Username: administrator Password: 1234 *Is recommended to change its factory setting password and user name 1. Administrator: Change Password: Camera Control: (Quality) - Low, High, Advance - (Resolution) - 640*480, 352*288, 320*240, 176*144 & 160 *120 (Split) - 1x1, 2x2 (Operation Mode): Continues Period: 1-60 sec View Log: view visitor IP Configuration: System, User, Motion detection, Network, Channel & DDNS 2.
IP VIDEO 9100 & 9100B PLUS USER MANUAL 2-2 - Users entered IP Video 9100(B) ’s AP, it will automatically request for Administrator’s Password. If user or other visitors don’t have the rights to use Administrator authorization password, press, “CANCEL” to ignore the inquiry.
