User Guide

IP POWER 1U USER MANUAL
Step 5. After amend the other 9258 webpage you plan to amend . Please open program “Make9258Html “ in
9258 web page SDK and just press” make html patch”.
Step 6 . There will be a new file “ Update_2006-01-11.bin” which is the BIN file include the amend webpage.
Please follow 9258 update procedure to update the firmware BIN file . Please note the Update procedure must
be done in port 80.
Note: program “Make9258Html.exe “ and amend webpage must in same file.
* If update fail and can not get IP address by IP EDIT , please use RS232 jack ( DB 9 Cable) connect with
the PC and 9258, and you can get IP address to log-in and update again. Please refer follow step:
1.POWER OFF the 9258
2. Use DB9 cable connect to the COM1 of PC and the RS232 of 9258
3. Execute WIN program " Hyper Terminal" : please go to " Start" --> " program" " Accessories " -->
" Communications "  “Hyper Terminal” .
- 28 -