User Guide

IP POWER 9258-1U USER MANUAL
In this part, please also set the DNS of your ISP in system configuration.
3.) Password : the password of this mailbox is no longer than 8 English letters.
4.) Sender : please fill in the name of sender. The Mail Server must support SMTP and
these fields must be filled in correctly.
5.) Receiver :no longer than 50 English letters. Please use blank space to separate two
receiver’s e-mail address. After you have finished this setting, you will receive the email to inform
you the IP address of the IP Power 9258-1U every time you enter the webpage.
6) Subject : the subject of the mail to be no more than 50 English letters.
7) Mail Body : please type the content of the mail here, it cannot be left empty.
After you have finished all of the above settings, click “ SAVE “ button to save your settings.
3. Setting the password for IP Power 9258-1U :
Click the “ Change password “ button on the left you can enter the change password page. The default
password of IP Power 9258-1U is 12345678.
User can change it into any password (not longer than 8 bit), then click apply button to save the change.
Note :
If forget the password , Use username " super user " when log in webpage and then click "OK
" turn power off for few second and then turn ON power . IP Power 9258-1U will to set back to
default password.
( There is space between super and user. )
4. Control the IP Power 9258-1U through Time Schedule :
User can control the time when IP Power 9258-1U starts or stop through preset time schedule.
Click the power schedule on the left of the page; you can select enter the time schedule setting
4-1 :Click “ power schedule” to control outlet 1-4 .
- 17 -
VER. X.X,