User Guide

IP POWER 9258-1U USER MANUAL
* Http Command Verification : setup the control possibility from HTTP command or SDK (VB & VC)
1. Select “ Cookie +Base64 “ : enable Http command & SDK control
2. Select “ Cookie “ : enable Http command & SDK control
3. DelaySwitch : to safety turn of PC / Server ( Windows OS ) by Software program , please set up the
delayswitch at 30 / 60 second . It help the PC connected to 9258 had enough time to do the
normal shut down work. After setting, all outlet will delay tunr off by appointed time.
1-1 IP address Settings: Ethernet (LAN ) and Internet(WAN)
1-1-1 Local Area Network (LAN) :
In LAN, you can set a fixed IP address or gain it from a DHCP server automatically. We suggest to use a fixed
IP address in order to let the other computers can visit the IP Power 9258-1U.
Now type the new IP address in the address field of IE, you can visit the IP Power 9258-1U. You also can use
the ipedit.exe to find theIP Power 9258-1U and modify its IP address.
1-1-2 Work on Internet (WAN) :
User can set the IP provided by your ISP. If the IP Power 9258-1U has a public IP address,
you can control it through the Internet. IP Sensor IP Power 9258-1U supports fixed IP, DHCP.
* IP Address: please type in the IP address provided by your ISP. If IP Power 9258-1U is working with a
Router, please refer to the network settings of the Router.
* Subnet Mask : please type in the Subnet Mask provided by your ISP. If IP Power 9258-1U is working with a
Router, please refer to the network settings of the Router.
* Default gateway: please type in the Default Gateway provided by your ISP. If IP Power 9258-1U is working
with a Router, please refer to the network settings of the Router.
* DNS Server : please fill in the IP address of DNS server. If you are in Taiwan, you can set it to 168.95.1.1.
* DHCP Clients: Enable– activate DHCP service. DHCP will assign IP address for each PC.
Disable – shut down the DHCP service. You can set the IP address by yourself.
* Beeper : Enable – activate the beeper . Disable – turn off the beeper.
If you control the IP Power 9258-1U through the web page, the beeper will beep once when
the operation work.
- 15 -
VER. X.X,