User Guide

IP POWER 1U USER MANUAL
6. Hardware control & setting
* Hardware control the power on/off. :
NOTE: Before use H/W control function, please do UNPLUG / DISCOUNT all the connection
of 8 outlet .
Control panel as follow:
1. Round circle button ( Left ) : select power outlet 1 ~4.
2. ON/ OFF button ( Right ) : Open /Close the H/W control function And
turn ON/OFF each outlet.
To do the Hardware control function, please unplug all the outlet connection first.
Press “ON/OFF” button for 5 seconds then you can hear one fast bee which
mean enable the H/W function. Then you can see the power light of front panel is flashing
and the relay is ticking.
From the power light flash situation, the outlet which is not keep flash can be control the ON& OFF
setting by click “ON/OFF “ button soon. You can select different outlet by click “Round circle
“ button.
To disable the Hardware control function, please Press “ON/OFF” button for 5 seconds then you can hear one
fast bee which means disable function.
7. Control and settings through the Internet Explore)
Type the new IP address of IP Power 9258-1U in the address field and you can enter the login web page. Input
the default username : admin and password : 12345678, or the password reset by you, click OK, and you can
then enter the Web Control page.
- 12 -