User Guide

IP POWER 9258-1U USER MANUAL
Installation &setting of “ IP9258service.exe” :
1. Insert attached CD in controlled PC .
2. Please install double click “ IP9258config.exe” ，then go to the install page as right illustration:
3. Please fill correct information in each section :
* IP9258 Address： please type in the IP address of 9258.
* HttpPort：please fill the port of 9258, default value is 80, if amend the port in 9258 please do correct
* UserName： admin
* PassWord：12345678 (password can amend in web page)
* Power Number： please fill the power channel in 9258 you would like to control ( If many PC/Server use
same power extended line, the extended line connect to channel 1 of 9258 and if all the PC /
Server set as channel 1 and same IP address in IP9258service.exe , then all the PC/Server
will be controlled at same time).
4. After fill above setting, click “Save Change “.
5. Click “InstallService” then “StartService” then please shutdown the PC/Server
6. After restart PC, the function start working.
- 11 -
VER. X.X,