User Guide

IP POWER 9258-1U USER MANUAL
X.X,
- 9 -
5. Initial Settings
Initial setting through the Ethernet
1. Open attached CD and save IPEDIT.exe in to your Hardisk , execute IPEdit.exe
2. All the IP 92XX series, like IP Power 9258-1U, IP Power 9258 & S Series IP Kamera 9000 series/ IP Video
9100 series in the same subnet of the Ethernet will be found and be display in the window by the software.
The default name of IP Power 9258-1U is IP 9258.
.
3. Click the equipment‘s name that you want to edit in the left of the window; it will turn fuscous, the
equipment’s name and IP address will display in the windows, you can rename (use numbers and letters). After
that, click the update button and the new setting will be work in 20 seconds.
4. Double click the name of the equipment you want to control, the IE browser window will open and connected
to this equipment in that Ethernet automatically. You also can type the IP address of the IP Power 9258-1U in
the IE browser to open the web page . We suggest you to update the IE to version 6.0 with SP1 or higher if your
IE notices you the security level is too low to open that web page.
NOTICE:
1. Make sure RJ45 network cable have been connected and the IP Power 9258-1U are power on.
2. IP Power 9258-1U’s default setting is fixed IP address: 192.168.10.100. The IP address of your
computer should in the same subnet with that of IP Power 9258-1U’s, so that you can open the
control web page. In the figure above, the IP address of IP Power 9258-1U is 192.168.100.168. You
can make sure the IP address of your computer first, then use the ipedit.exe to modify the IP address
of IP Power 9258-1U.after that, your computer can connect to the IP Power 9258-1U.
VER.