IP POWER 9258-1U USER MANUAL IP POWER 9258-1U USER MANUAL
IP POWER 9258-1U USER MANUAL USER MANUAL IP POWER 9258-1U Version: V1.38 2006.08 -1- VER. X.
IP POWER 1U USER MANUAL Warning: Any changes to this equipment without permission may cause damages to your equipment! This equipment has been proved by CE & FCC to can be prevented from the influence of harmful electronic jamming in normal business use condition. IMPORTANT NOTICE 1. We have no responsibility for the possible damage caused by improper usage or abnormal working environment. 2. Do not use IP POWER in strong shaking condition. 3. Please contact the dealer If IP POWER works improperly.
IP POWER 9258-1U USER MANUAL Table of Content 1. INTRODUCTION ............................................................................................................ FEATURES ......................................................................................................................... IP POWER 9258-1U FUNCTION DESCRIBE ......................................................................... 2.SPECIFICATION ...................................................................................
IP POWER 1U USER MANUAL 1. Introduction Standard 1U 19” Rack mount , IP POWER 9258-1U is a web controller which can be easily used in the industry field. With the remote network control technology, user can control or query the power supply of equipment. User can do this in any computer connected to the internet or local area network, there is no special program needed, also there is no need to open the external case of the computer.
IP POWER 9258-1U USER MANUAL 2. Specification Package contents One set of IP Power 9258-1U Front : Back Panel: * 9258T-1U Version : * 9258S-1U Version : Option : RJ45 (Cat5) net wire Option : Input Power Cable : Style Pan European , Australia or Unite Kindom Minimum System Requirements Intel Pentium III 300MHz or above/compatible AMD CPU WINDOWS operating system (IE5.
IP POWER 1U USER MANUAL 3. Interface Description There are 2 model of IP Power 9258-1U , please refer the out look of each model as follow : Model & outlet style: IP Power 9258S -1U : Standard NEMA for : Brazil, China, Canada, Japan, Mexico, Philippine, Taiwan, Thailand, USA. . Front panel : Back panel : IP Power 9258T-1U : Standard IEC 320 for Universal PC Power outlet - Pan Europe, Oceania , Asia , Africa.
IP POWER 9258-1U USER MANUAL IP Power 1U : all four series apply same main device. * Front panel show as below: From left to the right : 1. Power 1 : Power switch ( RED) for outlet 1- 4 switch ON /OFF and Self-protect AC reset button to cut off the power supply of outlets automatically if there is a shortcut or current overload. After user having solved the problem, push the reset button, the AC power supply will become normal. 2.
IP POWER 1U USER MANUAL 4. Hardware & Software installation Before you star to use IP Power 9258-1U, please follow the steps below Check the package to make sure the contents is complete. Prepare one Ethernet HUB or Router Check the voltage of the power supply to make sure it is AC 110-240 volt Please confirm the specification of your power cable. * for 220-250V, please use power cable at MAX 10A for each 4outlet. * for 100-120V, please use power cable at MAX 15A for each 4outlet..
IP POWER 9258-1U USER MANUAL 5. Initial Settings Initial setting through the Ethernet 1. Open attached CD and save IPEDIT.exe in to your Hardisk , execute IPEdit.exe 2. All the IP 92XX series, like IP Power 9258-1U, IP Power 9258 & S Series IP Kamera 9000 series/ IP Video 9100 series in the same subnet of the Ethernet will be found and be display in the window by the software. The default name of IP Power 9258-1U is IP 9258. . 3.
IP POWER 1U USER MANUAL 3. IF user can not enter the control web page, please set the IP address of IP Power 9258-1U and your computer in the same subnet. User can obtain the computer’s IP address, subnet mask, and default gateway through the following method. start run “ipconfig” type in “cmd” then open the MS –DOS window, now type in The last number of the IP address (default is 100) can be any number between 1~254, but cannot be the same with that of the computer’s.
IP POWER 9258-1U USER MANUAL Installation &setting of “ IP9258service.exe” : 1. Insert attached CD in controlled PC . 2. Please install double click “ IP9258config.exe” ，then go to the install page as right illustration: 3. Please fill correct information in each section : * IP9258 Address： please type in the IP address of 9258.
IP POWER 1U USER MANUAL 6. Hardware control & setting * Hardware control the power on/off. : NOTE: Before use H/W control function, please do UNPLUG / DISCOUNT all the connection of 8 outlet . Control panel as follow: 1. Round circle button ( Left ) : select power outlet 1 ~4. 2. ON/ OFF button ( Right ) : Open /Close the H/W control function And turn ON/OFF each outlet. To do the Hardware control function, please unplug all the outlet connection first.
IP POWER 9258-1U USER MANUAL Control the power supply of outlets Having entered the Web Control page of IP Power 9258-1U, click the SET POWER button on the left, you can enter the IO setting page as the following figure: - 13 - VER. X.
IP POWER 1U USER MANUAL IP Power 9258-1U can control 8 outputs individually at the same time. User can choose power on or power off with an electrical outlet . User may fill in the corresponding columns with the delay time you wish in seconds, then choose the action after delay to be on or off. Power Supply State Query Click the “ Set Power” button on the left, the page will be refreshed. The state of each electric outlet will be displayed in column control.
IP POWER 9258-1U USER MANUAL * Http Command Verification : setup the control possibility from HTTP command or SDK (VB & VC) 1. Select “ Cookie +Base64 “ : enable Http command & SDK control 2. Select “ Cookie “ : enable Http command & SDK control 3. DelaySwitch : to safety turn of PC / Server ( Windows OS ) by Software program , please set up the delayswitch at 30 / 60 second . It help the PC connected to 9258 had enough time to do the normal shut down work.
IP POWER 1U USER MANUAL NOTICE: 1) IP address format : xxx.xxx.xxx.xxx: yyyyy. yyyy means the port number, Ranging from 1 to 32767. 2) Subnet Mask: from 0 to 254 ( xxx.xxx.xxx.0 ~ xxx.xxx.xxx.254 ) 3) If DHCP is disabled, user must set the TCP Port and default Gateway .If DHCP is enabled, then the TCP port will be preset to 80( xxx.xxx.xxx.xxx: 80 ) and the default gateway will be set by the DHCP server, too..
IP POWER 9258-1U USER MANUAL In this part, please also set the DNS of your ISP in system configuration. 3.) Password : the password of this mailbox is no longer than 8 English letters. 4.) Sender : please fill in the name of sender. The Mail Server must support SMTP and these fields must be filled in correctly. 5.) Receiver :no longer than 50 English letters. Please use blank space to separate two receiver’s e-mail address.
IP POWER 1U USER MANUAL 4-2: Click “ power schedule 2” to control outlet 5-8 . If user wishes to control the power in one outlet of IP Power 9258-1U, you can fill in the time in the power control column and choose on or off. Support parameter of operate schedule : * Disable / Just Once / Every day * Work Day : every Monday to Friday. * Weekend : every Saturday and Sunday 5. Setup each outlet default setting : When regain power , each outlet will set as appointed default status.
IP POWER 9258-1U USER MANUAL 6. Internal Clock Settings & Network Time Protocol (NTP): * User can enter the internal clock settings : year , month, day , hour , minutes and second. * NTP function : customer can synchronize the time of IP Power 9258-1U to the Internet web address time . Please refer following the NTP server IP address : * 131.246.9.116 * 139.18.25.34 * 128.176.191.9 Note: To work NTP, please do set up in e-mail and have to receive e-mail from IP Power 9258-1U. 7.
IP POWER 1U USER MANUAL Note: 1. If the Network card is not onboard card, it needs to connect with your Main board by cable. Please refer your network card connection 2. You can get your MAC address in PC , please refer following pictures : Go to Network sign Status Support Details Then the value in Physical Address “ is the PC` MAC address. 8. GPRS for Cell Phone : Support WAP.
IP POWER 9258-1U USER MANUAL IP POWER IP Power 9258-1U support GPRS function, you can use cell phone (with online function), We support : Motorola V878 , Sony Ericsson T630 & K700i. . To setup the online device ( real IP address) as operate in browser .: 1) Address setting : key in your online IP address. For example : http://65.59.37.123 the interface is same as in IE(Internet Explore) . 2) The IP Address must be real IP address and can be work on Internet..
IP POWER 1U USER MANUAL 9. Check IP Power 9258-1U status though SNMP DDNS Server Settings: when your network connects to the Internet through ADSL, the IP address you gain is dynamic assigned by your ISP. So the visitor maybe can not visit the 9258 in local network because don’t know its IP address. We use DDNS method to solve this problem. Let’s explain that using the DDNS service provided by www.dyndns.com: First, we apply a domain name (for example, Aviosys) in www.dyndns.
IP POWER 9258-1U USER MANUAL 9. Check status though SNMP IP Power 9258-1U support SNMP V1 and V2 , user can use snmp program to get the status of each port in IP Power 9258-1U. - 23 - VER. X.
IP POWER 1U USER MANUAL 10. Control and Settings Through HTTP Order User can control the IP Power 9258-1U’s action directly though the HTTP orders. The format of the HTTP order is : http://username:password@XXX.XXX.XXX.XXX/Set.cmd?CMD=***Power+para1=*+para2=*+para3=*… … Explanations of each part of the order: Username : IP Power 9258-1U’s username, default username is admin Password : IP Power 9258-1U’s password, default password is 12345678 XXX.XXX.XXX.
IP POWER 9258-1U USER MANUAL http://username:password@XXX.XXX.XXX.XXX/Set.cmd? CMD=SetSchedule+Power=**+YY=****+MM=**+DD=**+HH=**+MN=**+SS=**+PARAM=****+ONOFF=* Explanations of each part of the order: Username : IP Power 9258-1U’s username, default username is admin Password : IP Power 9258-1U’s password, default password is 12345678 XXX.XXX.XXX.XXX the IP Address of IP Power 9258-1U Power=** setting of each parameter Control parameter are 1A 1B 2A 2B 3A 3B 4A 4B . A means connect power .
IP POWER 1U USER MANUAL 11. FAQ Q1: I forgot the password and can not enter the administration page now, what can I do? A1: Use username " super user " when log in webpage and then click "OK " turn power off for few second and then turn on ON . IP Power 9258-1U will to set back to default password. ( There is space between super and user. ) Q2: Why the on/off operation can work immediately? A2: if you operate theIP Power 9258-1U in Ethernet, the operation will work immediately.
IP POWER 9258-1U USER MANUAL Step 3. Amend webpage by HTML langrage( get from right click as in amend webpage”): Step 4 :Save file format as “UNIX” : Like choose “DOS to UNIX - 27 - VER. X.
IP POWER 1U USER MANUAL Step 5. After amend the other 9258 webpage you plan to amend . Please open program “Make9258Html “ in 9258 web page SDK and just press” make html patch”. Step 6 . There will be a new file “ Update_2006-01-11.bin” which is the BIN file include the amend webpage. Please follow 9258 update procedure to update the firmware BIN file . Please note the Update procedure must be done in port 80. Note: program “Make9258Html.exe “ and amend webpage must in same file.
IP POWER 9258-1U USER MANUAL Set the “Bits per second” as 19200 at COM1 ( Must at COM1) 4. Then power ON 9258 you will get message in Hyper Terminal . 5. Please check the message and get your IP address. - 29 - VER. X.
IP POWER 1U USER MANUAL 6. Use this IP address to update again. We supply original firmware V1.22 for update f 7. Log tin this address to update again. 8. If still can not finish update successful, please check if create BIN file too big . If need to ship BIN file, please use bin file V1.22.bin in SDK to update back to factory version.
