User Guide

- 60-
Ref#9076101012
How to setup Surf Pop
Cameras Online
The camera online section allows you to see the cameras that you have added from outside the network.
Once they have been added to this section every the software is open the devices will stay in this area.
Cameras online is basically all the cameras that you added that is outside the network. Any camera that was
added using the IP Service feature
Adding a device
Adding a camera to Surf Pop is fairly easy. Basically once your device is setup and connected to the web
you can search for your device through the IP Service feature that is built into the add device button.
1.) Simply click on the add camera button on the bottom of the device
2.) In the search field on the top left type in the device name that you have selected and then click the add
button to add the device to your list.
3.) Then once the device has been added you can find it in the online cameras section.
Removing a device
To remove a device from Surf Pop all you need to do is go to the online cameras section and find the device
that you would like to remove. Then do the following:
1.) Right click on the camera that you would like to remove and right click.