User Guide

- 56-
Ref#9076101012
10.) Using CNT with Surf16 CH
CNT makes connecting to the IP Kamera 9076 a very simple task. Surf 16 CH a multi-device DVR
monitoring software easily allows the user view the 9076.
Follow these simple steps:
MAC Address
There are two ways to find the MAC address in IP Edit .
*Note: IP Server must be enabled on the device’s webpage. By default IP Server is enabled.
Find MAC Address in LAN Using IP Edit
1.) In IP Edit , highlight the device that is being used. On the right side of IP Edit the MAC Address for
CNT will be listed.
*Note: Make sure when typing in the MAC address to leave out the “:”
Find MAC Address in WAN Using IPService on IP Edit
1.) Find the MAC Address through the internet, Open IP Edit and hit the connect button on IP Service.
2.) Then Type in the name of the device, in this case it is ―Sample Name‖, then hit the search button.
3.) Device will be listed and the MAC address should be displayed on the screen. Copy down the MAC
address and use it to connect via CNT.
Add device using CNT
1.) On Surf 16 Ch DVR software, right click on the screen on one of the windows and select Add
Camera
2.) Then under the section labeled MAC: Type in the MAC address.
3.) Do not forget to enter the password and login.