User Guide

- 53-
Ref#9076101012
Hhttp://192.168.1.192/vb.htm?subnetmask=255.255.0.0
Note: Default subnet mask is 255.255.0.0
Change Gateway:
This command changes the gateway the IP Kamera 9076.
http://ipaddress:port/vb.htm?gateway=gatewayaddress
Ex. http command
Hhttp://192.168.1.192/vb.htm?gateway=192.168.1.1
Change DNS:
This command changes the gateway the IP Kamera 9076.
http://ipaddress:port/vb.htm?dnsip=dnsipaddress
Ex. http command
Hhttp://192.168.1.192/vb.htm?dnsip=168.95.1.1H
MJPEG Streaming
This command integrates streaming data into a software, website, or any other application.
Hhttp://ipaddress:port/ipcam/mjpeg.cgi
Ex. http command
http://192.168.1.192/ipcam/mjpeg.cgi
9.) Using RTSP with VLC
Before Setting up VLC: Make sure that the 9076is set to be the DMZ host on the router that you are using,
please refer to the routers manual on how to accomplish this.
How to setup VLC media player & Open a network stream
Real Time Streaming Protocol (RTSP) gives the device another way to stream live video. Using programs
that support RTSP, you can broadcast the videos from the 9076 live.
Note: To access the device from outside the network. Please make sure of the following:
9076 should be set to DMZ host,
or mapping router's TCP ports 554 and 8554 to 9076, preferably at the same time mapping UDP port
6970-9999
1.) Open VLC media Player
2.) Click on Tools > Preference
3.) On the bottom of the screen click the Reset preference button.