User Guide

- 15-
Ref#9076101012
Custom Setup (No DHCP available)
When no DHCP is found on the device, the 9076 will be given a static IP Address.
Default IP: 192.168.1.168 (When 9076 is connected to PC directly)
Default Login: admin
Default Password: 12345678
1.) Highlight the 9076 device in the local devices section of IP Edit. On the right side of IP Edit
all network information of the device will be displayed.
If the device is not on the same network a Red Exclamation mark will appear in the IP
Network information section
2.) To setup the device, you will need type in the correct Gateway and IP Address.
The Gateway Address: The gateway address can be obtained in Windows under the network
connections page
IP Address: Make sure the first 3 sections of the IP Address matches the gateway address.
Example: Gateway Address – 192.168.1.1 IP Address – 192.168.1.xxx
3.) Once the Default Gateway information has been obtained, enter the correct information
into IP Edit and hit the submit button.