User manual

Note: When using the mouse to zoom in the snapshot function will not take a picture of the zoomed picture
but the resolution size.
How to Enable and Use EPTZ Controller
Note: When EPTZ is activated Video Codec mode will be switched to MPEG4 & M-Jpeg when disabled the
codec will be set on Mpeg1, Mpeg2, & M-Jpeg.
Also snapshot function works only with the EPTZ controller and not when using the mouse to EPTZ.
1.) Click on the EPTZ button located on the bottom of the screen of the 9070-IR.
2.) If the EPTZ has not been enabled a notification will notify the user that it must be enabled.
3.) Select Enable on the EPTZ function then hit the submit button
.
Once the Speed dome controller is activated click on left, right, up, down, and zoom buttons to view the
picture.
Note: To use EPTZ without activating
SD Card
To access the files on the SD card simply press the SD Card button on the live view
screen.
To play the file directly: Simply just press on the file of choice.
To Delete: Simply press the delete link on the SD card section
- 44-
Ref#90020326K0709