User manual

- 34-
Ref#92550806002
Help: The help command will provide all the commands available on the 9258xx.
To get the commands in help type: help in the telnet protocol.
Set power: The set power command allows the device to turn on and turn off
ports on the device. To set power on the device type
setpower p61=1: Port On setpower p61=0: Port Off
Get power: The get power command gives you the current status of the device.
To get power on the device type: 1 mean power on , 0 mean power off.
Notice:
The above information is for 9258xx ( with current meter ) only . Not for other IP
Power series.