User manual

- 8-
Ref#90020326K0709
4.) Setting up the device
Hardware setup
Setting up the device
*Before setup the device make sure of the following:
1.) Make sure that all the package contents are all included
if anything is missing please contact the store or your distributor.
2.) Make sure the power adaptor is the correct specification.
3.) Make sure that all the cables are working correctly
PoE Router Type
To use the 9070IR-PoE, the correct PoE router standard must be used. The type of PoE router that must be
used will have to be designed so that power can be sourced from the PSE through the data lines via data
transformer center taps.
Please see the image below for reference.
POE Router: End span
* End Span : Power can be sourced from the PSE through the data lines via data transformer center taps.
( Tap the unused wire pairs 1/2and 3/6 to carry power)
Internet Accessible Setup
The internet connection can be setup in two main ways so that the 9070IR-PoE can be accessed through
the internet
Connecting the Device
1.) Connect the IP Kamera 9070 to a HUB or Router with a RJ45 network cable.
2.) Connect the HUB or Router to the internet (May through ADSL/XDSL modem).
3.) Connect the power adapter to the DC 5V port of IP Kamera 9070.